Help with identifying a bolt

[speednjay]

95 E320 I’m wrapping up a head gasket and timing replacement, have this bolt left over and have no idea where it came from. Hoping it’s not an integral part of things and someone could recognize where it would go. Takes a 6 mm hex

[Jorn]

Could it be for the heater pipe, to keep it in place, at the back of the head? I only have experience with the M103 and a similar bolt is used for that purpose.

[speednjay]

Originally Posted by Jorn

Could it be for the heater pipe, to keep it in place, at the back of the head? I only have experience with the M103 and a similar bolt is used for that purpose.

I’ll double check that area. I’m pretty sure I got that bolt in. Its a stainless bolt it’s guessing it’s gotra be on the egr or exhaust

[speednjay]

Found it transmission dipstick tube bolt