Hi gang just-n-time here with a question, I sent off my fuel distributor from our 190E for a rebuild as it failed and dumped fuel into the engine and placed it in a non start condition, I have it back along with all the testing numbers from our friends at ( CIS FLOW TECH LIc.) Lary was very helpful and his price was quite good. If any of you need his service his CIS Flow Tech
19225 county rd 13
Fairhope AL. 36532
Larry owner
Phone 251 929 3771
Now on to the question I have, after rerinstall and setting the potentiometer at .07 KOEO polls 1&2. I have not had any success with it running, if I press down on the plate and try again it fires and dies, so my though is that I am not getting fuel, and so I have continued to turn the screw clock wise till It now has no free play in the air chamber plate. should I go to the trouble of removing the mas. and energizing the fuel pumps independently? I do not think that would help but I would like some input from the home team. Thanks for your time JNT