|
|
|
|
|
#1
12-27-2011, 08:01 PM
|
|||
|
|||
|
oil pressure gauge
I have noticed the last week or more on 190e 2.6 the oil pressure gauge in morning doesn't go all the way to the 3 bar line like it use to. I goes up to about mid-way or a little more. Then after a ways of driving it goes all the way up to the 3 bar like it always did. I was wondering if anyone else may have encountered this?
|
|
#2
12-27-2011, 08:11 PM
|
|||
|
|||
|
Most likely the ~20 year old sender is getting iffy. If it buggs you a new one shouldn't be too expensive. Mine acted up for months until I relocated it during my turbo install and hasn't acted up since.
__________________
 90 300TE 4-M Turbo 103, T3/T04E 50 trim T04B cover .60 AR Stage 3 turbine .63 AR A2W I/C, 40 LB/HR MS2E, 60-2 Direct Coil Control 3" Exh, AEM W/B O2 Underdrive Alt. and P/S Pulleys, Vented Rear Discs, .034 Booster. 3.07 diffs 1st Gear Start 90 300CE 104.980 Milled & ported head, 10.3:1 compression 197° intake cam w/20° advancer Tuned CIS ECU 4° ignition advance PCS TCM2000, built 722.6 600W networked suction fan Sportline sway bars V8 rear subframe, Quaife ATB 3.06 diff
|
|
#3
12-27-2011, 08:27 PM
|
|||
|
|||
|
mine does the same on the 95..... i just don't feel like changing it right now...maybe down the road
__________________
1989 300ce 129k ( facelifted front,updated tail lights, lowered suspension,bilstein sports, lorinser front spoiler, MOMO steering wheel, remus exhaust,stainless steel brake lines). (Gone) 1997 s320 154k (what a ride). Sold with 179k miles. Replaced with Hyundai Equus 1994 e320 Cabriolet 108k  1972 280se 4.5 153k Owned for 12 yrs, sorry I sold it [/SIGPIC]
|
|
#5
12-30-2011, 09:05 AM
|
||||
|
||||
|
Yes.
__________________
1988 California version 260E (W124) Anthracite Grey/Palomino Owned since new and still going strong and smooth MBCA member Past Mercedes-Benz: 1986 190E Baby Benz 1967 230 Inherited from mom when she downsized 1959 220S Introduced me to the joys of keepin' 'em goin' There are only 10 kinds of people in the world--those who understand binary and those who don't
|
|
#6
10-17-2012, 10:31 AM
|
|||
|
|||
|
I was out driving in my car and heard a funny noise over behind the glove box. Kind of a muffled buzz. Then it stopped and the oil pressure gauge was reading zip. If I raced the engine a bit it would go up to about 1.5 then drop back to 0. I have full synthetic in it and the level of oil is correct. When I loosen the oil cover at idle there is oil flying all around. The car is running at a cool 80 degrees and idles around 800? What went?
|
 |
| Bookmarks |
|
|
Linear Mode
