|
|
|
|
|
#1
03-06-2002, 04:07 PM
|
||||
|
||||
|
Crankshaft pulley bolt size? (M103)
I need to crank my engine to set TDC but my socket set only goes up to 22mm. How large is the crankshaft bolt? Thru searches I've seen that other engines are 27mm, but mine doesn't seem that large, but I could be wrong.
Any who can chime in please would be very much appreciated! TIA ~Paul _________________ '91 300E, 208k miles 
|
|
#2
03-06-2002, 05:55 PM
|
|||
|
|||
|
Should be 27mm Or 1 1/6".
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator
|
 |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Checking M103 fan pulley bracket for wear... | anthonyb | Tech Help | 3 | 12-23-2004 02:16 PM |
| tension pulley bolt, rh or lh threads? | dugdeb | Tech Help | 1 | 01-10-2003 05:25 PM |
| A/C Delco R4 compressor question regarding bolt size | airfoill | Tech Help | 1 | 07-26-2001 10:54 AM |
| Bolt size climate dial | yal | Tech Help | 2 | 03-30-2001 12:22 PM |
| What is this odd size Allen type bolt? | LarryBible | Tech Help | 3 | 10-02-2000 12:17 PM |
Linear Mode
