![]() |
Replacing outer control arm bushings
My independent gave me a quote of $450.00 to replace both rear outer control arm bushings (the source of bad squeak at left rear wheel) on my 88 300TE. Anyone out there familiar with this effort? Is it a tough DIY project? Also will an alignment be required after this work is completed? I would assume so but my tech failed to include it on the estimate.
Thanks, Ed C. |
Do a search!
I did mine recently. You need a tool to pull the old outer bushings. About $100 from www.baumtools.com. Still a pain the A$$ to do it and I do have access to a lift. It is "doable" by a DIY'er like myself but, thing about it. The actual bushings are cheap.
Good luck!:cool: |
All times are GMT -4. The time now is 02:17 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website