Hoping someone can help. Got a M111 engined W124, right hand drive.
I havea mystery vacuum pipe! It has come off the inlet manifold/throttle area somewhere. It lead down to the transmission. My gear shifts are very hard and clunky.
Problem is, I cannot see where it should go on the inlet/throttle. It became detached with a couple others as I replaced the manifold. I think the others are correct but can't be sure. I've got access to WIS but haven't been able to identify on the diagrams there.
It's the white one loose here:
01-12-2013, 11:39 AM
Threaded Mode
