126 driveshaft questions
 

When I removed the driveshaft on our 126 I found that the rubber sleeve and small rubber ring between the gland nut and the bearing carrier had degraded. These parts are not listed in Fast Lane or Parts Shop. Do I need to replace these (Dealer Source) or leave them alone?
Also there are two torque specs listed on the service CD for the flex disc bolts D-10 and D-12 as I recall. It however doesn't identify which bolt is which. Any help on these would be appreciated.
Thanks
Steve

I know that mine is shot as well. I will replace mine when I replace the front flex disk and center bering(not bad but if I have the shaft out again I will replace it as well) Performance Products has it listed for $2.39 so I would go ahead and replace it. I would also call Phil and see if he can get it. I have yet to find something he cannot get.