83 500 SEC Throttle Crankcase Breather & Vac Manifold Hose

[CamelotShadow]

Like to install or get ionstalled a new crankcase breather hose from underneath
& the long valve cover crankcase vacuum manifold with its center pieces.

How much teardown is req to replace these?
Looks like fuel lines for the valve cover manifold
Looks like could be entire fuel distributor
but is it possible to get inside the flap area?

I'm trying to tighten up the vacs to get it smogged.

So far I can't find Cap smog stations wanting to work on such a old MBZ. They say its a nightmare. They say they don't have exhaust analysers?
What are newer cars all computer with no need for them anymore?

I've done of the rubber hoses 7 things alot myself


If I press down in the FD tower w the allen 3mm it does really nothing til I get it pushed down alot it slows a tad...so is it in a good spot?

How far down is a slight push?

Anyway back to original question

I guess if the FD has to be removed I might have the new fuel injectors installed as I have them
but they seem fine & the car runs smooth.

I'm temted to buy those parts to have iun case I get a good indy
but I really want to leave that to my MB guy as I don't want to risk some
chop mech to do improper installs & possibly wreck things worse.