|
|
|
|
|
#1
09-04-2013, 11:41 AM
|
|||
|
|||
|
Ignition coil replacements
My ignition coil went bad, looking to replace myself. Seems pretty straight forward repair, but I can't seem to find a replacement coil wire, only coil wires with a full set of spark plug wires. I replaced my plugs,caps,rotor 6-8mo ago. Any recommend a place just to purchase wires?
Replacing with following: 1985 Mercedes-Benz 500SEL Sedan - Ignition - Page 1 Ignition Coil Brand: Bosch [More Info] Part Number: 000-158-45-03-M14 
|
|
#2
09-04-2013, 09:41 PM
|
|||
|
|||
|
Its not as straight-forward as it sounds. You need to procure a section of bulk coil wire, which is a solid core wire. Cut it to length and crimp 2 end terminals on it, preferrably with the correct crimping tool. The end terminals have a threaded nipple which allows you to screw on the correct wire ends to match your coil and cap. A good Mercedes shop will have the correct tool and parts to make a proper coil wire. Otherwise you're facing an uphill battle.
__________________
 90 300TE 4-M Turbo 103, T3/T04E 50 trim T04B cover .60 AR Stage 3 turbine .63 AR A2W I/C, 40 LB/HR MS2E, 60-2 Direct Coil Control 3" Exh, AEM W/B O2 Underdrive Alt. and P/S Pulleys, Vented Rear Discs, .034 Booster. 3.07 diffs 1st Gear Start 90 300CE 104.980 Milled & ported head, 10.3:1 compression 197° intake cam w/20° advancer Tuned CIS ECU 4° ignition advance PCS TCM2000, built 722.6 600W networked suction fan Sportline sway bars V8 rear subframe, Quaife ATB 3.06 diff
|
 |
| Bookmarks |
|
|
Linear Mode
