|
|
|
#1
|
|||
|
|||
Stalling update 300TE
Any idea on this stalling problem on a 1990 300TE guys….
Now I've replaced.. 1.OVP 2.ECU Temp Sensor 3.Fuel filter 4.Fuel pump relay 5.Speed sensor (Back of speedo head) The car runs ok from cold to hot and now appears to start stalling once the engine has been switched off and on again. The engine will tick over normally until the car is moved ,it will even stall if the car is in neutral and pushed a few feet backwards or forwards,this can greatly improved by removing the wires to the speed sensor. Any help gratefully received Simon AKA dasboot |
#2
|
|||
|
|||
I have how found that when I disconnect the runon micro switch the problem completely disappears?.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Need help with stalling 1989 300TE | BENZ-LGB | Tech Help | 27 | 10-20-2005 03:39 AM |
Stalling and alarm; '89 300TE | Hans Ribbens | Tech Help | 4 | 05-22-2004 01:55 PM |
89 300te stalling and hardstart when warm | jfhhch | Tech Help | 1 | 11-18-2002 10:50 PM |
89 300TE Stalling | Glick | Tech Help | 2 | 07-11-2002 11:22 PM |
Stalling with a twist on a 300TE | dasboot | Tech Help | 2 | 03-20-2002 03:43 PM |