![]() |
|
|
|
#1
|
|||
|
|||
96 C280 accelerator pedal very stiff....
Hi, having the above problem. Not had the car long... Just wondered if it's a common problem ??
Thanks. |
#2
|
|||
|
|||
Is the throttle pedal binding on a floor mat?
Next take a look under the hood, follow where the throttle cable pokes through the fire wall, it might go to a throttle position sensor just ahead of the brake master cylinder, see if anything is binding there. This a drive by wire system. If the cable goes towards the engine, there is a complicated linkage system under the intake manifold that might be binding. Does this car have a switch that looks like a snow tire or marked ASR? If so, these systems pushed back on the throttle when rear wheel slip is detected. |
#3
|
|||
|
|||
don't know this model at all, but on any other car I'd check/replace the motor mounts. if the engine is sitting 2" low because of a obliterated motor mount, that would bind linkage.
|
![]() |
Bookmarks |
|
|