![]() |
1997 E 420 transmission problems
I have a 1997 E 420. I started having problems with I am guessing the transmission. It will go into gear and drive but once I stop it act like it doesn't want to go. I would turn it off let it sit for a mint then start back up and it will drive again. I had the gear shifter changed drove it from the shop it went into gear changing out just fine then once i got it home and got ready to drive it again the same problem... won't move. I don't even feel the car shifting when I put it into drive or into reverse. I don't want to buy another transmission if it really doesn't need one. I don't know where to start.:confused::(
|
For starters check that the transmission fluid level is correct. If so, then I would change the transmission fluid & filter if it hasn't been changed in the last 30,000 miles.
|
Welcome to the forum,
Their is a active thread with similar problems, but do as Fred says.. http://www.peachparts.com/shopforum/tech-help/357331-1998-e320-intermittent-no-drive-reverse-pulled-codes.html Here is one a week a go... Got Transmission issues - P0715 Code - Questions - Mercedes-Benz Forum Hope it helps, Martin |
Thanks
|
Thanks alot
|
You are welcome. Let us know what you find?
Martin |
All times are GMT -4. The time now is 04:50 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website