|
|
|
#1
|
|||
|
|||
1997 E 420 transmission problems
I have a 1997 E 420. I started having problems with I am guessing the transmission. It will go into gear and drive but once I stop it act like it doesn't want to go. I would turn it off let it sit for a mint then start back up and it will drive again. I had the gear shifter changed drove it from the shop it went into gear changing out just fine then once i got it home and got ready to drive it again the same problem... won't move. I don't even feel the car shifting when I put it into drive or into reverse. I don't want to buy another transmission if it really doesn't need one. I don't know where to start.
|
#2
|
|||
|
|||
For starters check that the transmission fluid level is correct. If so, then I would change the transmission fluid & filter if it hasn't been changed in the last 30,000 miles.
__________________
Fred Hoelzle |
#3
|
|||
|
|||
Welcome to the forum,
Their is a active thread with similar problems, but do as Fred says.. 1998 e320 intermittent no drive/reverse pulled codes Here is one a week a go... Got Transmission issues - P0715 Code - Questions - Mercedes-Benz Forum Hope it helps, Martin |
#4
|
|||
|
|||
Thanks
|
#5
|
|||
|
|||
Thanks alot
|
#6
|
|||
|
|||
You are welcome. Let us know what you find?
Martin |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|