|
|
|
|
|
#1
09-02-2014, 04:00 PM
|
|||
|
|||
|
81 300sd starter switch?
Hi,I replaced my ignition switch about two years ago and I went out to start it today for work and it seemed as if the key wouldn't go all the way to the start position and I couldn't feel any kind of spring back on the key. i made sure I had the selector in park. Any help would be appreciated. Thanks. It worked fine Friday,I don't get it. Luckily I have an 86 300SL for a backup, it needs to be driven anyway to get the cobb webbs off of it. Greg.
|
|
#2
09-03-2014, 06:56 AM
|
||||
|
||||
|
Did you buy the lock too,with keys?There are several bad replacement switches out there.I ordered the best from this forums parts place finally after 3 switches.
__________________
1999 w140, quit voting to old, and to old to fight, a god damned veteran, deutschland deutschland uber alles uber alles in der welt
|
|
#3
09-03-2014, 03:59 PM
|
|||
|
|||
|
I bought the one with the lock and key. For now I'm going to install a push button for the starter. Thanks.
|
 |
| Bookmarks |
|
|
Linear Mode
