|
|
|
#1
|
|||
|
|||
Which direction do I turn the MPU?
Could someone please tell me which direction to turm the MPU adjustment screw to lean the fuel mixture on my 1972 350sl.
The adjustment screw faces away from you. I read somewhere that turning the screw clockwise leans the mixture. Does turning the screw clockwise screw the adjustment screw into the unit or back it out of the MPU? Thanks, Knarf
__________________
72 350SL #69 73 450SL Parts Car? 78 450sl Parts Car 79 450SLC - Sold 1985 280sl 87 190E 2.6 - Donated 90 300E-Junked 97 E420 |
#2
|
|||
|
|||
Always hard to remember the various places such adjustments matter. When you are doing it properly with an exhaust gas analyzer it is apparent. I don't remember.
The knob adjusts in distinct increments (clicks) move it 4-5 one direction...pause... move it back and go the other direction. Go the direction that makes the engine run faster. If it doesn't matter then return to the beginning and leave it alone. There is only about 2-3% CO change from one end to the other if I recall and none of it matters to anything but idle as the circuit is removed when the throttle switch is opened.
__________________
Steve Brotherton Continental Imports Gainesville FL Bosch Master, ASE Master, L1 33 years MB technician |
#3
|
|||
|
|||
Steve,
Thanks for the reply. Knarf
__________________
72 350SL #69 73 450SL Parts Car? 78 450sl Parts Car 79 450SLC - Sold 1985 280sl 87 190E 2.6 - Donated 90 300E-Junked 97 E420 |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
190e turn signals not working properly | AMG | Tech Help | 5 | 12-01-2003 09:21 PM |
Turn flasher problem | iwannabenz | Mercedes-Benz SL Discussion Forum | 5 | 07-14-2003 03:13 PM |
turn signal problem after steering box R&R | rvolheim | Tech Help | 3 | 06-07-2003 04:19 PM |
Hot Start Problem -- 220 Will Not Turn over when Hot | MBenz2 | Tech Help | 0 | 03-10-2003 06:29 PM |