|
|
|
|
|
LinkBack | Thread Tools | Display Modes |
#1
|
||||
|
||||
EURO LIGHT CONVERSION QUESTION.... DONT WANT CITY LIGHTS, PLEASE ADVISE
I installed the euro Bosch lights in my car.Everything good but bulb out indicator is on now. I did not choose to jump the wires or even install bulbs in the city light socket. Would this cause the problem?
__________________
82 911SC Euro Wide body conversion track/street/show 85 190E 16V Euro 86 300E 5 speed Diamond blue/navy (sold) 87 190E-16V 51K miles minter Blue black/black (sold) 95 S500 Lorinser coupe 39K miles Silver/black (sold) 80 911SC Black/tan (sold) 87 190E-16 RennTech 3.4 24V Blue black/ black (sold) 87 930 Turbo 505 slant GP white/black (sold) 95 993 C2 GP white/tan (sold) 82 911SC Hot Rod lightweight Black/black (sold) Last edited by nippy; 06-27-2015 at 03:31 PM. |
#2
|
|||
|
|||
Possibly. You can install the light bulbs and just not turn them on. What did you use for modifying the stock 4 prong plugs? Have you checked all of the other bulbs to confirm you didn't have one fail at the same time?
|
#3
|
||||
|
||||
It shouldn't, you're only moving the lights around using the 4-pin to 6-pin conversion.
However, the city light is the corresponding "park light" for the US version. If your turn signal illuminates with the lights on "park" (and not flashing) then you should be okay. If you don't have park lights in front then that is what's causing the bulb out indicator to come on. You need to confirm how you installed the wiring, what's working and what isn't.
__________________
http://farm8.staticflickr.com/7271/7...144c3fc1dc.jpg |
Bookmarks |
|
|