PeachParts Mercedes-Benz Forum
Page 2 of 2 1 2
Show 50 post(s) from this thread on one page

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   190E 2.6 stalled and won't start (http://www.peachparts.com/shopforum/tech-help/370648-190e-2-6-stalled-wont-start.html)

lsmalley 08-09-2015 08:02 PM
Quote:
Originally Posted by Skippy (Post 3506719)
Wouldn't an attempt to start put the code back into memory, assuming it's still the same problem keeping it from starting?
I think the car would have to actually be running long enough to trigger the code.....his car is not starting at all so I doubt he will get any codes.

Schmohey 08-13-2015 09:15 PM
I ended up replacing the wires and EZL. Still no start. I was about to check/order the CPS.

So the problem turns out that I erroneously plugged in the wires at the distributor cap. After looking at the old one and compared it, I matched it up and started the car. The car started right up. Thanks everyone for the help!


All times are GMT -4. The time now is 01:49 AM.
Page 2 of 2 1 2
Show 50 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website