Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 05-03-2002, 01:59 AM
pieceofcrap300e
Guest
 
Posts: n/a
please help me im desperate again

ok first i unintentionally ran out of gas due to a faulty gauge went to a mechanic because i didnt know it was out of gas they changed the cap and rotor and also put new spark plugs in and obviosly it didnt fix the problem eventually they put gas in the car and it fired right up but now the idle is surging and a ton of black smoke is coming out all they can tell me is that its running rich and they dont know what is wrong there isnt any diagnostic lights coming on in the dash but before occasionally the o2 light would come on so my question is what should i look to replace?could it be a bad o2 sensor? my car is getting plenty of spark and never smoked a bit before this could it be clogged injectors?and if so would it make it run rich? im really confused any help would be much appreciated ohh yea the car seems to run fine at higher rpms if that means anything thank you for your help

Reply With Quote
  #2  
Old 05-03-2002, 02:40 AM
Johnson Chan
Guest
 
Posts: n/a
have u ran it empty before?

1: something he "fixed" wasnt right, are the spark plugs gaped properly, wires right, etc. etc.

2: running it low can get the old stuff, deposits, sludge etc. into the system, so it could be clogged injectors

3: running it low all the time can damage the fuel pump, but i kind of doubt it with ur symptoms
Reply With Quote
  #3  
Old 05-03-2002, 03:44 AM
pieceofcrap300e
Guest
 
Posts: n/a
nope never ran it empty before the gas gauge read near a half a tank but the yellow light did come on so i dont know as for the mechanics doing somthing wrong its highly possible becouse i took it to the nearest shop instead of a mercedes specailist and i think they were in over there heads for now on i will only take my car to a reputable mb shop thanks for your help. someone also told me its a good chance my o2 sensor is bad but i dont know.
Reply With Quote
  #4  
Old 05-03-2002, 08:38 AM
J.HIDALGO's Avatar
Registered User
 
Join Date: Jul 1999
Location: Jax, FL
Posts: 1,785
If it is the original O2 sensor...

change it anyways. You can do NO harm by getting a new one (except your wallet, of course)
Good luck!
__________________
J.H.
'86 300E
Reply With Quote
  #5  
Old 05-03-2002, 08:52 AM
moedip
Guest
 
Posts: n/a
Before you spring for a new O2 sensor - you probably sucked crud from the bottom of the tank into your system. If the car ran good before it ran out of gas - chances are nothing is broken - so don't change parts at random - too expensive. I'd get a couple of cans of that fuel system cleaner/conditioner stuff from Pep Boys or other such place and put them in the gas tank and run it - you will probably see a difference after about 1/2 hour as it cleans your fuel system. Using logic - how can running out of gas cause your car to run rich - other than crud running through the lines? Worth a try and may save you more money.
Reply With Quote
  #6  
Old 05-03-2002, 03:17 PM
Registered User
 
Join Date: Feb 2001
Location: BC, Canada
Posts: 378
If you suspect bad fuel and/or you don't know when your fuel filter was changed, change the filter.
__________________
VR
1967 250SL
Reply With Quote
  #7  
Old 05-03-2002, 03:36 PM
engatwork's Avatar
Registered User
 
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 13,663
I was told by a guy that maintained humvees for the US army that the absolute WORST thing you can do is run them near MT or dry. The reason was because of pulling stuff out of the tank that don't need to be in the fuel system.
__________________
Jim
Reply With Quote
  #8  
Old 05-03-2002, 06:35 PM
pieceofcrap300e
Guest
 
Posts: n/a
ok replaced the fuel filter today and still is running the same also put fuel system cleaner in it so far it has had no effect the car still is running bad im thinking about breaking down and buying the o2 sensor but dont want to if it aint broke as i am running out of money very rapidly when i disconnect the wires from the sensor the car maintains a rpm of around 2000 and runs good does this mean the sensor is good or bad?could there be a problem with the fuel distribution thingy?im still at a loss and hope i find out whats wrong soon thanks for your help
Reply With Quote
  #9  
Old 05-04-2002, 02:48 AM
Registered User
 
Join Date: Feb 2002
Location: Orlando, FL
Posts: 788
What do you guys think about having the gas tank removed and having it flushed out and cleaned?? There is a place in town that does that. My car has almost 170k on it, and figured that something like this couldn't hurt it.
__________________
'86 420SE Euro
904 Midnight Blue, Gray Velour
Dad bought it new, now I own it.

"A Mercedes-Benz is like a fine wine, it only gets better with age."
Reply With Quote
  #10  
Old 05-04-2002, 08:42 PM
pieceofcrap300e
Guest
 
Posts: n/a
-UPDATE- today i replaced the oxygen senser with one from a 5 litre mustang it fixed my idle surging problem but now i have another problem the car idles smoothly now but hesitates really bad when i take off and is also still getting horrible gas mileage i would guestimate it at about 10 miles per gallon and i can tell it is still running rich and is also still smoking (black smoke) any suggestions as to what i should replace next?as of taking the gas tank to have it cleaned probably aint a bad idea if you have the money i dont but if i did i would i really appreciate everyones help you guys have been wonderful in helping me fix my old beater benz thanks again for the help
Reply With Quote
  #11  
Old 05-05-2002, 01:50 AM
haasman's Avatar
Registered User
 
Join Date: Jun 2001
Location: San Francisco, CA
Posts: 3,097
pieceofcrap300e

I think you should go back to the scene of the crime-

-Let's review ... you ran out of gas:

*OK it could be gas tank crap but sooner or later it should clear out.
*You had the cap, rotor and plugs replaced but still it runs like crap.
*You have changed the O2 sensor but it won't take a load.

My guess is to double-check the cap, rotor and plugs that were replaced.

-Question: MBZ cap and rotor? Plugs ... what kind? What are they gapped to?

My 2 Cents
Reply With Quote
  #12  
Old 05-05-2002, 10:37 PM
Registered User
 
Join Date: Mar 2002
Posts: 14
I am no expert but I think your repair shop interfered with your airflow sensor screws. They are located on the fuel distributor and control the amount of fuel that gets mixed with the air. My guess is that in their effort to fix the problem they turned a few screws and have messed up you mixture settings.
Reply With Quote
  #13  
Old 05-06-2002, 05:52 AM
pieceofcrap300e
Guest
 
Posts: n/a
Smile

i think rupert hit the nail right on the head becouse ive replaced everything i know of to replace (i figured it was a good idea anyway becouse most of the stuff looked like it hadnt been changed in a while)im going to go to the shop tomorrow and ask them if they messed with that stuff someone else had told me that might be the problem too.as of now my car is running pretty good with the exeption of a little smoke and a really heavy gasoline odor and im getting real poor fuel economy but other than that my car drives like a dream i am very thankful for everyones help!
Reply With Quote
  #14  
Old 05-06-2002, 08:25 AM
jsmith's Avatar
Ronin
 
Join Date: Aug 2001
Location: At Sea
Posts: 1,729
hey Ricky,
maybe by now you'll have figured out what type of board this is. how bout changing that handle? nobody here really thinks of their rides that way. quite the opposite
__________________
joE
1993 300e-2.8
- gone now <sigh>
"Do not adjust your mind, it's reality that's malfunctioning"
http://banners.wunderground.com/bann...L/Key_West.gif
Reply With Quote
  #15  
Old 05-06-2002, 10:45 AM
Registered User
 
Join Date: May 1999
Location: So. Burlington, VT
Posts: 78
Joe is right on. Please change your handle because it is offensive. You take your car to a mechanic that throws parts at it before he figures it is out of gas and then you replace the O2 sensor with a Ford part!!!!! I seriously doubt that the O2 sensor is operating properly for a 300E. My daughter recently had an O2 sensor replaced in her Saturn and the part is different for an automatic or standard transmission. "Cheapowner" would be a better moniker

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 06:57 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page