|
|
|
|
|
#1
05-07-2002, 08:34 PM
|
|||
|
|||
|
117 injector seal help
Greetings to all forum members,
I just received a replacement fuel injector and seals from Fastlane. The MB shop manual shows 2 different lower seals that can be used,#1160780473 or #1160780773. They look very different. Fastlane only offers the latter #. I haven't pulled the old injector yet because of this concern. Does it matter which seal is used or should I use the same type seal that the old injector used? Thanks in advance for any and all replys, Knarf
__________________
72 350SL #69 73 450SL Parts Car? 78 450sl Parts Car 79 450SLC - Sold 1985 280sl 87 190E 2.6 - Donated 90 300E-Junked 97 E420 Last edited by knarf; 05-07-2002 at 08:40 PM. 
|
|
#2
05-08-2002, 01:32 AM
|
||||
|
||||
|
I would speculate that the latter number is an updated/upgraded part. I'll let those more knowledgeable explain.
__________________
Mike Tangas '73 280SEL 4.5 (9/72)- RIP  Only 8,173 units built from 5/71 thru 11/72 '02 CLK320 Cabriolet - wifey's mid-life crisis 2012 VW Jetta Sportwagon TDI...at least its a diesel Non illegitemae carborundum.
|
|
#3
05-08-2002, 02:51 AM
|
||||
|
||||
|
If you are talking about your 72 they have two types Federal and California. Try the online catalog in Fastlane. You have to go by engine#.
__________________
Happy Benzing Darryl, Hill 2005 SL55 AMG Kleemanized 1984 500 SEC 1967 W113 California Coupe [SIGPIC] https://picasaweb.google.com/lh/myphotos
|
 |
| Bookmarks |
|
|
Linear Mode
