![]()  | 
	
		
 fuel pump relay 
		
		
		I got the new fuel pump relay for my 560 sel from fastlane and it cured the problem for a while.  I drove it once to the gas station, and I ran it  a few other times (waiting for paperwork to clear up registration problems), and the last time I ran it, it died and never started back up-fuel pump out again.  I jumped out the fp relay and it started up.  Do the new relays have reliability problems as well?  What now?  Thanks, 
	Chris  | 
		
 No, usually not.  It sounds like your fuel pump(s) could be drawing too many amps and blowing the relay like a fuse. 
	 | 
		
 Also the ignition module must send a VOLTAGE signal to the TD pin on the fuel pump relay so that the relay knows that the engine is running. 
	 | 
		
 I have got to go with Benzmac on this one. That was the problem I had with my 500SEL. Take it from me, do not buy cheap crap to replace the fuel system components with. I repeated that montra as I was replacing my third fuel pump. 
	 | 
| All times are GMT -4. The time now is 09:38 PM. | 
	Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
	
Search Engine Optimization by vBSEO 3.6.0
	Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website