|
|
|
#1
|
|||
|
|||
M103 rocker arm nut torque setting?
I'm finally getting around to changing out my valve stem seals. Anyone know what the proper torque setting is for the nuts that hold down the rocker arms?
__________________
03 CLK430 Cabrio 211K Pweter Silver/ Oyster Leather 90 300SEL 214k Pearl Black/ Alto Grey/Black Leather Prior: 85 190E, 88 300TE, 89 300TE, 90 300E 2.6, 90 300TE, 92 300E 2.6, 91 and 93 300SL, 87 Ferrari Mondial Cabrio |
#2
|
|||
|
|||
Sorry got it from Startek
21 NM. Sorry I should have checked first.
In case anyone needs it... https://www.startekinfo.com/StarTek/outside/11832/Resources/201Create/PDF/50005.pdf
__________________
03 CLK430 Cabrio 211K Pweter Silver/ Oyster Leather 90 300SEL 214k Pearl Black/ Alto Grey/Black Leather Prior: 85 190E, 88 300TE, 89 300TE, 90 300E 2.6, 90 300TE, 92 300E 2.6, 91 and 93 300SL, 87 Ferrari Mondial Cabrio |
#3
|
|||
|
|||
Don't over torque them at all, they will strip very easily. There was a new version of these bolts that were approx three threads longer...don't recall their exact length though.
__________________
"Rudeness is a weak man's imitation of strength" - Eric Hoffer |
Bookmarks |
|
|