getting no power to console switches tested with test light 2 fuses on pass side eng ciompartment all fuses light up only on one side is this normal ??? haven't tested relay yet trying to fig out fuse box

Not normal. With the key in the "on/run" position you should have power to both sides of the fuse. Corrosion is usually the culprit if the fuses are good.

I use a brass bristled brush to clean the clip ends.

__________________
“Whatever story you're telling, it will be more interesting if, at the end you add, "and then everything burst into flames.”
― Brian P. Cleary, You Oughta Know By Now