|
|
|
|
|
#1
11-13-2017, 06:55 PM
|
||||
|
||||
|
2004 shaky S500
I was wondering if someone could help me with this one... My friend has a 2004 S500 with 130K miles. His car/engine shakes at anything over 1,500 rpm. You can even feel it in the floor. Anything below 1,500 rpm - smooth. That's at park if you were to increase the rpms or while driving, both the same result. With the hood open and the rpms at or above 1,500 rpms, the engine is completely still so I have to rule out motor mounts. Any ideas?
__________________
Remember, Bad Decisions Make For Good Stories 
|
|
#2
11-13-2017, 07:36 PM
|
|||
|
|||
|
Motor and trans mounts.
__________________
 90 300TE 4-M Turbo 103, T3/T04E 50 trim T04B cover .60 AR Stage 3 turbine .63 AR A2W I/C, 40 LB/HR MS2E, 60-2 Direct Coil Control 3" Exh, AEM W/B O2 Underdrive Alt. and P/S Pulleys, Vented Rear Discs, .034 Booster. 3.07 diffs 1st Gear Start 90 300CE 104.980 Milled & ported head, 10.3:1 compression 197° intake cam w/20° advancer Tuned CIS ECU 4° ignition advance PCS TCM2000, built 722.6 600W networked suction fan Sportline sway bars V8 rear subframe, Quaife ATB 3.06 diff
|
|
#3
11-13-2017, 08:04 PM
|
||||
|
||||
|
Wow, I've experienced worn mounts at idle, that's usually the acid test... This car is quiet at idle but shaking at 1,500 rpms. Interesting though.
__________________
Remember, Bad Decisions Make For Good Stories
|
 |
| Bookmarks |
|
|
Linear Mode
