Blower motor {2012 C300 4matic
 

Hi, hope somebody can help me,


I replace the ac/ Blower motor and the resistor and no luck still no working.


1- I check power from control unit to the resistor and this are my reading.
low speed-2.84v
H- 10.11V.


2-Red power cable to resistor 12.5v
Brown Cable -ground
3- from resistor to blower 0
any help please I'm going nuts :]


I Believe iI have power to the resistor and power from the control unit?


3 cable to the resistor 1-12v 1- Ground 1-smaller cable from the control panel. ground and power to the blower from resistor.


any help please.

Possible bad resistor? That is what it would seem anyway. Is it possible to swap for another?