Hi, hope somebody can help me,


I replace the ac/ Blower motor and the resistor and no luck still no working.


1- I check power from control unit to the resistor and this are my reading.
low speed-2.84v
H- 10.11V.


2-Red power cable to resistor 12.5v
Brown Cable -ground
3- from resistor to blower 0
any help please I'm going nuts :]


I Believe iI have power to the resistor and power from the control unit?


3 cable to the resistor 1-12v 1- Ground 1-smaller cable from the control panel. ground and power to the blower from resistor.


any help please.

Possible bad resistor? That is what it would seem anyway. Is it possible to swap for another?

__________________
-diesel is not just a fuel, its a way of life-
'15 GLK250 Bluetec 118k - mine - (OC-123,800)
'17 Metris(VITO!) - 37k - wifes (OC-41k)
'09 Sprinter 3500 Winnebago View - 62k (OC - 67k)
'13 ML350 Bluetec - 95k - dad's (OC-98k)
'01 SL500 - 103k(km) - dad's (OC-110,000km)
'16 E400 4matic Sedan - 148k - Brothers (OC-155k)