PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   M104 ticking sound after work performed (http://www.peachparts.com/shopforum/tech-help/40028-m104-ticking-sound-after-work-performed.html)

joebnz 06-13-2002 12:58 AM
M104 ticking sound after work performed
 
I serviced the transmission and when finished, during engine running to check ATF level I noticed a ticking sound from top end which I don't believe was there before. My question, can damage happen to the valve train if the engine is rotated backwards? I think I got turned around when underneath and when rotating engine to align TC drain plug, went backwards about 20 degrees. I changed the engine oil afterwards to see if clean oil would eliminate problem, no help. Running Castrol 20-50. I read another post that suggested one quart of ATF in engine. Is it time to pull the valve cover? Help!!!

pentoman 06-13-2002 08:46 AM
BE sure the ticking isn't from the ignition system - refit all the plugs and leads.

later

joebnz 06-14-2002 09:21 AM
Plug wires ckecked OK.


All times are GMT -4. The time now is 12:31 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website