|
|
|
|
|
#1
01-16-2020, 12:50 AM
|
|||
|
|||
|
W201 190E 16V Bosch Plug Wires
Does anyone have any experience in using the Bosch 190E 8V wire sets on the 16V engines?
Bosch plug wires are not available for the 16V engines anymore. If anyone has a new Bosch 16V wire set that they are not using and want to sell it, I might be interested. I already have two used sets. 
|
|
#2
01-16-2020, 07:03 AM
|
||||
|
||||
|
So go check out the Beru,,, these are fitted to lots of Mercedes W201 W123 W124 engines. I have gone over to Beru i purchased Bosch set,, and returned them the quality was very poor and the first time i fitted them a plug retaining spring fell off ,so i sent them back for a refund . Now i have Beru HT leads a Bosch distributor cap, rotor arm, but then i fitted a set of Beru spark plugs..
|
|
#3
01-16-2020, 08:11 AM
|
|||
|
|||
|
no bosch wires, ever. had 3 sets bad out of the box in the 90s, m117 motors. they're made here and not in germany like the oe blue wires that were on mbs forever, until the 80s or so. beru, bremi or karlyn is all i used for mb and bmw.
no experience with 16v wires, can't help there. Last edited by porkface; 01-16-2020 at 08:24 AM.
|
 |
| Bookmarks |
|
|
Linear Mode
