camshaft position sensor mb c250 - PeachParts Mercedes-Benz Forum

we2gabriel · #1 02-18-2021, 08:41 PM

code says PO.34062 The position sensor for the intake camshaft (cylinder bank 1) has an electrical fault. The signal comparison is faulty...............what do i need to change on this problem?

engatwork · #2 02-19-2021, 05:56 AM

Swap sensor with one of the other ones, clear the code, run car and see if issue moves. If issue moves replace the sensor.

we2gabriel · #3 03-20-2021, 01:33 AM

Quote:

Originally Posted by engatwork

Swap sensor with one of the other ones, clear the code, run car and see if issue moves. If issue moves replace the sensor.

---the check engine still comes out with the same code

nulu · #4 03-20-2021, 10:31 AM

Do you have a delayed start?, or and short rattle? If so you need to replace the cam adjuster at intake cam or and exhaust adjuster

we2gabriel · #5 03-20-2021, 01:32 AM

P034062 The position sensor for the intake camshaft(cylinder bank) has an electrical fault The signal comparison is faulty.
--- i already swap the sensor but the check engine still comes out and says this P034062..
can anyone can suggest what to do because the mechanics says need to change the computer box now...NEED HELP and thanks you for reply