![]() |
|
|
|
|
![]() |
|
LinkBack | Thread Tools | Display Modes |
#1
|
||||
|
||||
Any problems swapping out Dash and Wirings from a 91 260E to a 87 260E ?
There was an Accident that melted my wiring and many parts in the dash of my 87 260E. I got a spare parts car, a 91 260E to replace the damages parts. I would Loved to hear if anyone had the experience or knowledge that is swap this going to work? Thank you. Harideva
Last edited by hdvl; 06-27-2021 at 12:16 PM. |
#2
|
|||
|
|||
US market 260E (later called 300E 2.6) had a 3.27 axle up to 89 and from 1990 they had a 3.07 axle so your speedometer might be showing a wrong speed if you swap it.
|
#3
|
||||
|
||||
Thank you. My Speedo in the 87 is not damage, but some of the wirings around it needs replacing. I'll try to keep the original Speedo. Thank you
|
#4
|
||||
|
||||
Anyone knows what is the material of the exhaust system toward the rear for the 1991 W124 ? Thank You
|
#5
|
|||
|
|||
It's not stainless and they do rust out.
|
#6
|
||||
|
||||
Is there any Chrome molly in the Exhaust ? Thank you
|
![]() |
Bookmarks |
|
|