Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 07-01-2002, 01:36 AM
Registered User
 
Join Date: Sep 2001
Location: Austin, Tx
Posts: 713
Do I need to get an alignment after changed wheel sizes?

going from 15 to 18s... not sure why I would, but I just wanted to make sure...

Reply With Quote
  #2  
Old 07-01-2002, 01:42 AM
blackmercedes's Avatar
Just a guy
 
Join Date: Dec 2000
Location: St. Albert, Alberta, Canada
Posts: 3,492
On the C230 I went from 15's to 17's and back to 15's without an alignment. Seems to be fine...
__________________
John Shellenberg
1998 C230 "Black Betty" 240K

http://img31.exs.cx/img31/4050/tophat6.gif
Reply With Quote
  #3  
Old 07-01-2002, 04:25 AM
A. Rosich's Avatar
Registered User
 
Join Date: Nov 1999
Posts: 883
Just to be on the safe side, I would align the car after upgrading to 18"s.

Although, are you really shure you want to do that??? The ride will suffer inmensely.

A. Rosich
S320, 1998
E320T, 1995
Reply With Quote
  #4  
Old 07-01-2002, 12:28 PM
csnow's Avatar
Registered User
 
Join Date: May 2002
Location: Mass
Posts: 1,127
The alignment should be the same, though those low-profile tires will be far less forgiving if your alignment is a bit off, or any related steering/suspension components are worn.
__________________
1986 300E 5-Speed 240k mi.
Reply With Quote
  #5  
Old 07-01-2002, 01:26 PM
Registered User
 
Join Date: Sep 2001
Location: Austin, Tx
Posts: 713
alright, well here is the deal, I just put on lowering springs and bilstein sports, so my car needs an alignment. Im not driving much, so I guess ill just wait untill the new wheels arrive.

I understand about the ride quality, but im young, and a stiff ride doesn't bother me at all...
Reply With Quote
  #6  
Old 07-01-2002, 03:31 PM
Moderator
 
Join Date: Mar 2000
Location: Gainesville FL
Posts: 6,844
The wheels won't change the alignment but they will change what the specs should be. In the end the guy doing the alignment better have a good idea.

In the long run alignment specs will have to be developed to deal with what you have done. I would suggest a few extra millimeters of toe based upon the direction everything moves under the extra loading. Those can be applied now or later.

Alignment specs are designed to allow stationary measurements that result in the proper position during loading. By altering the suspension factory specs no longer apply; but won't be changed when the tires og on.
__________________
Steve Brotherton
Continental Imports
Gainesville FL
Bosch Master, ASE Master, L1
33 years MB technician
Reply With Quote
  #7  
Old 07-01-2002, 10:41 PM
Registered User
 
Join Date: Sep 2001
Location: Austin, Tx
Posts: 713
thanks everyone. Right now im looking at 3 different alignment places. There is the dealership and two independant places. Both the independent places have another entity do the alignment. One shop is Ben's Workshop, a higly reputed establishment that has been around for years, and my mechanic, a mercedes fiend who has been working on my car since I got it and who I trust a lot. So I don't really know where to go... is there something in particular I should be looking for (i.e. some type of machine etc.) I would think the dealership would be the best, but I don't know how they would handle the new specs for the alignment and the price would obviosly be higher...
Reply With Quote
  #8  
Old 07-02-2002, 12:49 PM
Moderator
 
Join Date: Dec 2001
Location: Southern California, U.S.A.
Posts: 8,538
Yeah, go to a shop that uses the Hunter GSP9700:

http://www.gsp9700.com/

All of the dealers use them, and many independent tire shops do, too.

Click on the link for 'locate a GSP9700', enter in you city, state, zip code, the distance to search from your location, and you should get a nice list of shops.

I also recommend calling several shops for quotes. The pricing i got was all over the place, from $12 / wheel to $40 / wheel.

FWIW, my local MB dealer charged me $14/ wheel.
__________________
Paul S.

2001 E430, Bourdeaux Red, Oyster interior.
79,200 miles.

1973 280SE 4.5, 170,000 miles. 568 Signal Red, Black MB Tex. "The Red Baron".
Reply With Quote
  #9  
Old 07-02-2002, 03:27 PM
Registered User
 
Join Date: Sep 2001
Location: Austin, Tx
Posts: 713
thanks a bunch!
Reply With Quote
  #10  
Old 07-03-2002, 01:13 AM
Registered User
 
Join Date: Apr 1999
Posts: 2,638
My local dealer charges me only $90 for a full 4-wheel alignment. If it's not right, I get to take it back for FREE.

Also, get it aligned with the stock wheels & tires if possible (assuming your wheels are true, and your tires aren't badly or unevenly worn).

Make sure they get their BEST person to do your alighnment- remember it's not the equipment, but the operator. An excellent tech with string and chalk will do better than most who just "set the toe and go".

Also, make sure they give you a printout of the specs before and after. Also, if there are SportLine alignment specs for your chassis, get those, since you lowered and stiffened your suspension and are going to extrememly low-profile tires. They should also use the proper spreader-bar for proper toe set.

I've tried two alignment shops who have received glowing testimonals, but when it comes to Mercedes, they just don't do enough and have the experience.

My dealer does THE BEST PERIOD.

:-) neil
1988 360TE AMG
1993 500E
Reply With Quote
  #11  
Old 07-03-2002, 01:34 AM
Registered User
 
Join Date: Sep 2001
Location: Austin, Tx
Posts: 713
Neil, why should I have the alignment done with the stock wheels? Because the proper numbers are available for the stock wheels? Thanks.
Reply With Quote
  #12  
Old 07-03-2002, 02:04 AM
Registered User
 
Join Date: Apr 1999
Posts: 2,638
Yes, the alignment numbers are setup for the stock wheels and tires. Try to get as close as to the factory setup as possible.

I have a set of 215/55R16 tires & wheels for the wagon that I use for SportLine alignment and when I go to my 225/45R17 tires & wheels the setup is perfect.

It just doesn't work the other way around.

:-) neil
1988 360TE AMG
1993 500E
Reply With Quote
  #13  
Old 07-03-2002, 02:41 AM
Registered User
 
Join Date: Sep 2001
Location: Austin, Tx
Posts: 713
right... see, I didn't know how the alignment business works, so I was assuming they "tuned" the car to the proper adjustment by "feel" rather than by numbers. But now I know better! So I will schedule an appointment with the dealer (also a highly reputed place with great service...and the proper machine) and ask them to set it up to sportline 300E specs. One last question... would the dealership have the sportline specs handy? Is there a place where I could print them out for their use? Thanks!
Reply With Quote
  #14  
Old 07-03-2002, 07:53 AM
Moderator
 
Join Date: Mar 2000
Location: Gainesville FL
Posts: 6,844
What should I say?

All I can say is if I read this thread and knew nothing about what was being said, I would be full of the wrong impressions.

Neil, had it right about the tech doing the alignment not a machine. But he has it wrong about how specs matter and what to do with them. if you want your car to drive right there IS NO spec to accomplish this. This is where the tech comes in. It is his responsibility to read the handling and the numbers and figure what to do. IFFFF he does this within someones factory specs.... great for him.

The actual readings will not change with your wheels. What changes is how your car reacts. The car NEEDS to be aligned with the tires that ones wishes to drive with. If the settings happen to work for driveablity with different tires , they should. BUT, tires make the car. The ones you are going to use are going to make the car ride like crap. They will have so much influence over the handling that the only hope for correction rests with an experienced MB/alignment tech. One whose shop is situated where he can do at least a 60mph road test before and after.

This goes for any alignment shop. If they are tight,in a city situation,that prevents proper road testing, they will not do the road test. One doesn't become good at aligning cars unless road tests before and after form the basis for your experience.

If I were chosing I would place the Alignment first in the term MB/Alignment tech. An experienced alignment tech will do better with whatever he aligns than a less experienced tech. Having ones experience be with MB finishes the deal, but given a choice between either factor I take the alignment experience to be more important than the MB experience.
__________________
Steve Brotherton
Continental Imports
Gainesville FL
Bosch Master, ASE Master, L1
33 years MB technician
Reply With Quote
  #15  
Old 07-03-2002, 10:03 AM
Registered User
 
Join Date: Apr 1999
Posts: 2,638
Steve- is correct in his clarification. The "number" the factory gives is a range. Just setting it to any value in the range, doesn't mean the car will react the way you want it to.

My local MB dealer alignment tech (he does 99% of all MB alignments at the dealer), does at least 2-test drives (freeway on-ramp right next to dealer) and hence two-setups to "tweak" the alignment just right. He even calls me for a final test drive including a freeway jaunt upto 75 MPH, to make sure I'm satisfied.

$90 for 2.5 hrs work, I'm very happy.

:-) neil

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 06:27 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page