PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   Distributor spin & shaft on 500SE(1987) (http://www.peachparts.com/shopforum/tech-help/4161-distributor-spin-shaft-500se-1987-a.html)

Peterson L. 05-21-1999 03:53 AM

As read from the Repairing Manuals, as the distributor spins faster the weights on the shaft move outward and the centre points cam or trigger rotor is advanced on the shaft it rotates, and this shaft requires periodical lubrication.

Anyone has the experience how to clean and lubricate this shaft? TKS!

WDurrance 05-21-1999 10:10 AM

Hi,
Under the ignition rotor there is a piece of felt in the top of the distributor shaft. A few drops of light oil on the felt is sufficient to lube the distributor shaft. Most of the distributors made after 1978 have an epoxy coating on the upper section of the distributor shaft and are less prone to siezing and wear problems found on earlier versions.


------------------
W.R.Durrance
ASE Master Tech
Mercedes Tech 19 Years

Peterson L. 05-21-1999 09:03 PM

Hi WDurrance!
Tkx for quick reply.

But is it necessary to clean or change the contact? And how often this unit is need to be replaced as per your experience (how many KM)?

Benzmac 05-21-1999 10:05 PM

They usually are not normal wear items.

------------------
Benzmac:
ASE CERTIFIED MASTER AUTO TECHNICIAN
LEAD TECHNICIAN FOR 14 BAY FACILITY
MERCEDES SPECIALIST 8 YRS
PARTNER IN MERCEDESSHOP.COM




All times are GMT -4. The time now is 10:51 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website