I am looking for the MB tool to pull the Harminic Balancer Hub off of the crankshaft. I can't find one for love nor money.


Can a regular flat 3/4 bolt harmonic balancer puller be used?


Does anyone know where one can be bought or rented?


Thanks for any info.

Any balancer puller should work.

__________________
"Rudeness is a weak man's imitation of strength" - Eric Hoffer

Thank you. Got one on the way.

It shouldnt be that tight. I use two pry bars to walk it off the snout.

__________________

90 300TE 4-M
Turbo 103, T3/T04E 50 trim
T04B cover .60 AR
Stage 3 turbine .63 AR
A2W I/C, 40 LB/HR
MS2E, 60-2 Direct Coil Control
3" Exh, AEM W/B O2
Underdrive Alt. and P/S Pulleys,
Vented Rear Discs, .034 Booster.
3.07 diffs 1st Gear Start

90 300CE 104.980
Milled & ported head, 10.3:1 compression
197° intake cam w/20° advancer
Tuned CIS ECU
4° ignition advance
PCS TCM2000, built 722.6
600W networked suction fan
Sportline sway bars
V8 rear subframe, Quaife ATB 3.06 diff