Good morning...I am in the process of removing parts off my 1995 e320 wagon which after 300,000+ miles has come to the end of the line.

In removing the wiring harness I have come to the last wire but I cannot for the life of me figure where it goes to. Every other connection has come out clean but this one located in the back of the engine and routing past the oil filter is a mystery. I've looked under the car and the only thing left is to remove the starter? Anyone out there experienced with this connection?

Thank you in advance.

__________________
I have never met a man so ignorant that I couldn't learn something from him. -Galileo Galilei, physicist and astronomer (1564-1642)

Possibly the crank position sensor?

__________________
Jim

1 connector goes to the oil pressure sending unit

Possible oil level or oil pressure sensor.

__________________
To see my 129 parts for sale visit:
http://stores.ebay.com/The-Mercedes-SL-Store
John Roncallo

The oil level/pressure wires(as well as the starter signal) are part of a different harness referred to as the lower harness, not part of the main engine harness