![]() |
|
|
|
#1
|
|||
|
|||
Dash Cluster gone dark! Mercedes 190e 2.3
Switched out the back lite dial illumination bulbs for LED, Reinstalled the cluster, The LEDs where tested before installing, But they are not working. Tried bypassing the Dimmer switch, that didn't work either. Will try the red fuse next.
All other lights seem to work well, blinkers, hazards and start up indicator lights all fine.. Any thoughts on this problem is appreciated. |
#2
|
|||
|
|||
Hi fellas, well i'm another proprietor for a 2.3-16 87" the vehicle was an exelent shape And the casing was inmaculated 123.000kms at work (euro) And evo 2 wheels 8.25x17. I have an issue. At the point when o set the key in second position the check lights in the bunch doesnt illuminated (only the battery light illuminated) when I start The vehicle the battery light went out And the alternator are in 13.6 with running motor. In any case, in the event that I interface the frameworks with a wire, similar to the windshield water sensor, coolant sensor, brake liquid the lights in the group illuminated propperly. So my main issue is the framework light check with the second position key And motor not running my bunch lights doesnt work.
snaptube vidmate Last edited by delsin; 09-20-2023 at 07:23 PM. |
![]() |
Bookmarks |
|
|