|
|
|
#1
|
|||
|
|||
Connecting Rod Bearing Bore M103
Can anyone give me the connecting rod bearing bore for a 1990 3.0L M103 engine?
I am always needing technical data like this, can anyone give me a source where I can find it? I have the mercedes benz Engine 103 service manual, but I can't seem to find the info in the book. Am i just not looking hard enough or is it not there?
__________________
George Carstens |
#2
|
|||
|
|||
There are actualy two sizes! The size depends on punch marks on the bearing cap. WITH 1(one) OR no punch mark the size is 51.600 to 51.609mm.
With 2 punch marks 51.609 to 51.619mm.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
Bookmarks |
|
|