|
|
|
|
|
#1
08-17-2002, 08:04 AM
|
|||
|
|||
|
96 C280 rear Brake Job
Hi group,
I need to do the rear brake job on the 96 C280 and have a few questions Is a brake light sensor used on the rear brakes of the 96 C280? What is the min rotor thickness? What size is the allen bolts for the pads? How do you relieve the parking brake for removal of the rotors? Any other procedural help would be appreciated. Many thanks
__________________
Martineau Gauda mgauda@sprintmail.com 96 C280 Mercedes 82 Rolls Royce Silver Spur 
|
|
#2
08-17-2002, 01:42 PM
|
||||
|
||||
|
Min thickness is 7.3mm.
My 97 C280 with no ASR does not have any wear sensors on the rear, but I believe some models might, check on your car to see of there are any. No allen bolts for the pads, it is a fixed caliper on the rear. Hammer out the cross pins with a punch and pull the pads out. Then unbolt the caliper of you are changing the rotors too. Make sure the parking brake is off when you pull the rotors off.
__________________
Ali Al-Chalabi 2001 CLK55 1999 Dodge Ram 2500 Cummins Diesel 2002 Harley-Davidson Fatboy Merlin Extralight w/ Campy Record
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
