Need Your Assistance Please
 

the cloth braded rubber hose that goes from the master cylinder reservoir to the clutch petal was leaking, and while i was messing with it, it pulled away from the clutch petal.

1. can I replace with a rubber fuel hose?
2. what is the best way to put the hose on?

thank you very much

Jeff
1987 190E 2.3 16V
5 speed

You should get the blue silicon hose that is designed for brake fluid.

The hose attaches to a plastic fitting at the clutch master cyl. The fitting goes into a rubber seal. All can be purchased separately

thank you.

It looks like I feed the hose through the hole under the dash. and then try to connect it to the clutch petal. Not much room under there!

jeff