Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 08-31-2002, 11:26 AM
Posts: n/a
Need Your Assistance Please

the cloth braded rubber hose that goes from the master cylinder reservoir to the clutch petal was leaking, and while i was messing with it, it pulled away from the clutch petal.

1. can I replace with a rubber fuel hose?
2. what is the best way to put the hose on?

thank you very much

1987 190E 2.3 16V
5 speed
Reply With Quote
Old 08-31-2002, 11:30 AM
Join Date: Mar 2000
Location: Gainesville FL
Posts: 6,844
You should get the blue silicon hose that is designed for brake fluid.

The hose attaches to a plastic fitting at the clutch master cyl. The fitting goes into a rubber seal. All can be purchased separately
Steve Brotherton
Continental Imports
Gainesville FL
Bosch Master, ASE Master, L1
33 years MB technician
Reply With Quote
Old 08-31-2002, 11:34 AM
Posts: n/a
thank you.

It looks like I feed the hose through the hole under the dash. and then try to connect it to the clutch petal. Not much room under there!

Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 05:47 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page