|
|
|
#1
|
|||
|
|||
Hydraulic fluid low
I was checking my fluid levels today and found that my level control/4matic hydraulic fluid is low (below the MIN. mark on the dipstick). I purchased my car 3 months ago, a 1990 300TE 4matic wagon with 102,000 mi...., so I'm new to Mercedes & this forum (which is great) The fluid specified is a specific Mercedes item. I'm going to order some online but I'm wondering if I could use some other hydraulic fluid until it gets here. Should I even drive the car? Thanks in advance!
|
#2
|
|||
|
|||
Don't even think of using a different fluid. Make sure you order the correct fluid from MB - there are several different types.
__________________
Mick J '08 Chrysler 300CRD (MB OM 642 engine) '95 E220 estate '89 230TE (R.I.P.) |
#3
|
|||
|
|||
Had a feeling that was the answer, thanks...should I drive it if it's low?
|
#4
|
|||
|
|||
The 'correct' answer is, no you shouldn't drive it. However, if you don't carry a heavy load and don't do anything that might make demands on the 4WD system and if it's not actually dropping any more, it'll probably be OK for a few days.
You did check it unladen? - self levelling system causes fluid level to drop temporarily when it compensates for a heavy load.
__________________
Mick J '08 Chrysler 300CRD (MB OM 642 engine) '95 E220 estate '89 230TE (R.I.P.) |
Bookmarks |
|
|