I was cleaning all the electrical connections under the hood of my 300CE. It seems to have gained a bit of power. I'm very careful so as to make sure the plug goes on the same way as it did before. I pulled the coolant temp sensor plug from the head. Checked it to see if it had a lug to make sure it only went on one way. It did, so I cleaned it. Much to my horror it can actually plug in in any direction. I dont know how it should line up, and it seems to have 4 pins inside.... any hints as to which way round it should go??
------------------ Brian Drought 1991 300CE http://www.users.globalnet.co.uk/~drought/ ICQ: 2180069 |
Don't worry the connector will plug in both way make sure no water in connector.
hope this help. ------------------ MB STARS Master Guild Technician,12 years MB tech 5 years independent shop owner |
It's OK. They are designed that way. You cant go wrong. They have the same resistance either way.
------------------ Benzmac: ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
Nice design!!
OK... Now I'm less scared of it, I can test it ;-) Thanks!! ------------------ Brian Drought 1991 300CE http://www.users.globalnet.co.uk/~drought/ ICQ: 2180069 |
All times are GMT -4. The time now is 01:24 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website