|
|
|
#1
|
|||
|
|||
I have an 1987 MB 260E. Under braking, the car will shake. I originally thought it was bad brakes, so I replaced the front rotors and pads with MB parts. I bled the brakes while doing that also. The problem still presists. What can it be?! Worn sway bar/suspension bushings?
Wilson Tam |
#2
|
|||
|
|||
Do you feel this shake more in the brake pedal or the steering wheel?
If the steering wheel shakes on brake application, and the front rotors are new, my first guess would be a bad front tire(s). If the steering wheel does not shake but the brake pedal pulsates along with a general vibration through the car, suspect the rear brakes/rotors. In any case, I would not suspect suspension bushings, shocks, etc. if you only feel it while braking. Hope this helps, Hatch ------------------ 1980 240d 4sp ASE Master Auto Technician ASE Advanced Engine Performance |
#3
|
|||
|
|||
Did you clean the hubs and apply a thin coat of grease to the hub when doing the rotors? I have seen some rust behind the new rotor cause this.
------------------ Benzmac: ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
#4
|
|||
|
|||
Check the lower control arm bushing and also the tie rod end center link,steering shock.
------------------ MB STARS Master Guild Technician,12 years MB tech 5 years independent shop owner |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
1993 300sd vibration...please help | photos | Diesel Discussion | 2 | 01-12-2005 08:32 PM |
Vibration and now locked up front brake W126 | BMJR | Tech Help | 6 | 08-10-2003 03:51 PM |
400E Vibration, What to do Next?? | timreid | Tech Help | 9 | 10-03-2002 11:45 AM |
260e Vibration During Acceleration | etsa | Tech Help | 3 | 08-20-2002 03:11 AM |
This DARN Vibration! | mradowic | Tech Help | 5 | 05-31-2002 06:35 PM |