|
|
|
#1
|
|||
|
|||
air pump
My air pump is acting up. Any reason why I should not just disconnect the power to the clutch and not use it. I believe it is only used during the cold start to help the cats?
On a 1991 560SEL thanks m |
#2
|
|||
|
|||
Simply disconnectng the power to the engagement clutch will stop the pump from feeding air to the head, BUT, the ECU also sends an electrical signal to the Switch-Over-Valve that supplies vacuum to the the AIR valve between the pump and the head AIR ports. [ this feed signal is in parallel with the clutch power feed and are the same ].
Unplugging clutch for non AIR system operation also requires SOV dis-connect and/or SOV/AIR valve vac line plug/BBing...... |
#3
|
|||
|
|||
disconnect on the air pump is done. But where do I plug the vacuum line or disable the SOV.
m |
Bookmarks |
|
|