|
|
|
#1
|
|||
|
|||
Swelling 300E Air Filter
Hey take a look at what has happened to my 300E Hengst air filter. The filter is about 2 or 3 months old.
|
#2
|
|||
|
|||
Here is a closeup
|
#3
|
||||
|
||||
the air filter looks distorted/swollen-only thing thing i could think of is would be due to water or a faulty batch of filter.
|
#4
|
|||
|
|||
That's nothing to be worried about.
Probarly the filter housing puts a little extra pressure on it there so it gets squezed together when installed.
__________________
/Per MB E300TDT -98 Last edited by per eriksson; 01-05-2003 at 03:15 PM. |
#5
|
|||
|
|||
I was thinking the air charge was too pressurized. The fastest I have taken it is about 100 mph. I haven't tampered with the air tubes. Moisture should not be a problem because it is very dry in CA and it is usually garaged.
|
#6
|
||||
|
||||
Did this happen to any previous air filters used in this car?
If not, you might just simply swap it out with a new one.
__________________
Mike Murrell 1991 300-SEL - Model 126 M103 - SOHC "Fräulein" |
#7
|
|||
|
|||
It has nothing to do with air being pressurized.
Your filter has been sqeezed notning to worry about |
#8
|
|||
|
|||
No, I had the MB Mann in there for god knows how long and its strips were quite uniform once I removed them. I don't get what is meant by "squeezed." Installation was simple and it was pretty snug fit. It came from fastlane in great condition.
|
Bookmarks |
|
|