Which trannys compatible with a 126?
Sometime in the near future I plan on a tranny rebuild. Should I stick with the stock 722.324 (right?) tranny, albeit one with any improved parts, or replace it with a later tranny? The question being, are there any better trannys from later model MBs that would bolt up to a 126 with no or light modifications?
|
|
Thanks Mike, awesome site. So is the only one I could replace mine with is the 91 722.355? Or the 350 from the 560? Does anyone know what is better about these than my 324?
What is the best, non-original tranny (even from other bodies) I can put in mine that will fit with little or no mods? |
Sorry to bring this up, again...
I was using the SEARCH function and found this posting. I recently purchased a 1987 420SEL with a transmission that has been recently rebuilt. All the charts show a different model for the '86-88 cars as being a 722.324, whereas my '91 420SEL shows as having a 722.355. Both indicate a 2nd gear start, etc.
Are these just a matter of modulator pressure vs. being really different (OK, non-swapable) transmissions? In a nutshell, can one safely replace a 722.355 with a 722.324, or can it be modified to work properly? Thanks to all for your kind consideration? Cheers! |
All times are GMT -4. The time now is 03:57 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website