|
We are replacing the head gasket on a 2.3 190E MB and we need some info. We have not been able to obtain a servive manual in our time frame.
1) Torque Spec for head bolts 2) Proceedure for cam shaft / chain alignment 3) Location of tension adjustment for serpentine belt. Thanks |
1. 55 NM not ft/lbs
2. 90 deg. rotation 3. 90 deg. rotation The crank should be at top dead center and the small line on the cam should line up with the right side of the head as you are standing in front of the vehicle. The poly belt tensioner: Loosen the center bolt and tighten the adjuster bolt on top. If it will not tighten, it will need a new tensioner. (remember we sell parts!) Thanks ------------------ Benzmac: 1981 280GE SWB 1987 16V ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
| All times are GMT -4. The time now is 05:25 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website