|
|
|
|
|
#1
10-18-1999, 04:19 PM
|
|||
|
|||
|
We are replacing the head gasket on a 2.3 190E MB and we need some info. We have not been able to obtain a servive manual in our time frame.
1) Torque Spec for head bolts 2) Proceedure for cam shaft / chain alignment 3) Location of tension adjustment for serpentine belt. Thanks |
|
#2
10-18-1999, 08:46 PM
|
|||
|
|||
|
1. 55 NM not ft/lbs
2. 90 deg. rotation 3. 90 deg. rotation The crank should be at top dead center and the small line on the cam should line up with the right side of the head as you are standing in front of the vehicle. The poly belt tensioner: Loosen the center bolt and tighten the adjuster bolt on top. If it will not tighten, it will need a new tensioner. (remember we sell parts!) Thanks ------------------ Benzmac: 1981 280GE SWB 1987 16V ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Contents of Benz V8 head gasket sets? | New2MBZ | Tech Help | 1 | 08-31-2003 10:24 PM |
| Engine Head Gasket Replacement? | MichaelW124 | Tech Help | 2 | 07-18-2003 01:23 PM |
| 603 head gasket, trade for 103 head gasket? | sixto | Mercedes-Benz Used Parts For Sale & Wanted | 0 | 05-12-2003 03:08 PM |
| '91 190e 2.3 201 Head Gasket Replacement | katpete | Tech Help | 2 | 05-09-2003 10:29 AM |
| a couple of questions on head removal | MarkM | Diesel Discussion | 14 | 02-13-2002 11:43 AM |
Linear Mode
