|
|
|
#1
|
|||
|
|||
I'm still searching for the reason my 350SDL is running hot under heavy load. I'm working my way towards the radiator testing/replacement but noticed the EGR valve this weekend. How is this tested for operation? Can I pinch the vacuum hose to it to disable it?
I see there is a tube that goes from what looks like the control switch to the cars interior. What is it? Door locks? |
#2
|
|||
|
|||
EGR valve is there to help with emissions, part of EDS system. The EGR system won't cause any overheating. Radiator & or other engine componets will cause overheating, head gasket leakage is common on this engine.
|
#3
|
||||
|
||||
Is head gasket leakage common on the 300SDL as well?
|
#4
|
|||
|
|||
What causes the head gasket failure?
|
#5
|
|||
|
|||
Head gaskets on aluminum head diesels are subject to more stress than any other car. Any over heating will cause premature failure. The engines uses stretch bolts & they are designed to keep the head secure to block. Stress from combustion heat is a common reason for failure. Show me a car w/over 200k miles & most likely the h/gasket has been replaced.
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
EGR (Exhaust Gas Ricirc.) Valve Test | hifeverz | Mercedes-Benz SL Discussion Forum | 5 | 05-08-2004 09:02 PM |
Where is the EGR valve on the ML320 ? | sdanville | ML, GL, G-Wagen, R-Class, Unimog, Sprinter | 2 | 12-15-2003 07:24 PM |
EGR valve removal & block-off photos | gsxr | Diesel Discussion | 5 | 12-30-2002 03:40 PM |
EGR Valve function | agupta | Tech Help | 7 | 04-12-2002 08:10 AM |
unsteady valve clearances | jerryrigged | Diesel Discussion | 5 | 01-24-2002 09:55 PM |