|
|
|
#1
|
|||
|
|||
210 M104 drain bolt on block... where?
where on the passenger side is that bolt to drain coolant? near or between what exhaust manifold? near firewall, middle, or near radiator?
|
#2
|
|||
|
|||
It's about 2/3 to 3/4 of the way from the front to the rear of the block, behind the rear exhaust manifold. It doesn't look like a bolt, it looks like a hose connection. I think because it is designed for you to connect a hose, so that when you loosen to drain, you can drain into a bucket or wherever exactly you want it to go besides on the shop floor or running down your driveway.
Good luck, |
#3
|
|||
|
|||
thankx, did flush and fill today! that nipple description helped!
|
#4
|
|||
|
|||
Hi, reviving an old thread here. Off the top of their head, can someone tell me the size of the tube that should go on the fitting? I may be doing this tonight and would like to go to the store and pick up the appropriate sized hose on the way home from work.
Thanks in advance!
__________________
08 W251 R350 97 W210 E320 91 W124 300E 86 W126 560SEL 85 W126 380SE Silver 85 W126 380SE Cranberry 79 W123 250 78 W123 280E 75 W114 280 |
#5
|
||||
|
||||
Quote:
Dan
__________________
2012 E350 Bluetech |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|