190E front hub bolt patterns: 190E 2.3 vs. 190E 16v
Does anyone know if the 190E front hub bolt patterns for an '87 190E 2.3 and an 190E 16v are the same.
I found some hardly used 16v front Bilsteins at a great price but unsure if they will bolt on to the 8v. Haasman |
haasman
They do have different part #'s, that's all I can tell you.;) |
The 16V car uses hubs & bearings from the 300E, however the complete hubs w/bearings will interchange.
|
Just an addition, the fronts for the 2.3-16 are the same as the 2.3 8v, but not the rears. The 16V has the SLS bag in the rear, so while the shocks are the same, the springs aren't.
|
So you are saying I could bolt the front Bilsteins off of the 16v on to the 2.3? Or, would I also have to change the front hubs, and then calipers etc?
Haasman |
They bolt right on. But, if you want to get the 300E's ventilated front brakes . . . skip that and bolt on some 400E, 4 pot calipers!
|
All times are GMT -4. The time now is 12:11 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website