|
|
|
#1
|
|||
|
|||
Hi, The drivers door will lock from outside with key but just started refusing to unlock from outside with key. The key will not turn and you can see the lock knob on inside trying to move further down. Any suggestion are well appreciated. Larry
|
#2
|
|||
|
|||
Does the cylinder rotate at all? If it does and it's sticking moving in the opposite direction, it's more than likely the problem is with the central locking linkage or actuating cylinder, but just in case it isn't,try and lube the lock cylinder with either WD40 or graphite. I prefer the WD40 b/c it comes with a neat little spray tube that you can gently push into the cylinder. I don't know what you're weather has been like, but if it's been cold you may have some h2o in there. The WD40 will displace the moisture and will not make a gummy mess like the graphite. Good luck
------------------ Jeff L 1987 300e 1989 300e |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Master key -- Alarm | DanielG | Tech Help | 0 | 05-22-2003 02:30 PM |
Master key -- Alarm | DanielG | Mercedes-Benz SL Discussion Forum | 0 | 05-20-2003 05:19 PM |
GOOD 4" DRIVERS IN MY 300E | 300EVIL | Car Audio and Multimedia | 10 | 09-29-2000 04:42 AM |
Key doesn't want to go in the ignition 86 300E | DEPRIEST | Tech Help | 3 | 02-25-2000 09:31 PM |
Drivers Door lock doesn't engage 1986 300e | DEPRIEST | Tech Help | 3 | 02-10-2000 09:41 PM |